Garage Door FAQ — Maple Valley
Answers to common garage door questions for Maple Valley homeowners.
My garage door is really loud—it's shaking the whole house. What can I do?
Attached garages in Maple Valley homes often amplify door noise, especially in older construction. Start by lubricating the track and roller hinges with a silicone spray—rust and friction are usually the culprits. If that doesn't help, worn rollers or a loose chain drive can rattle loudly. We can inspect and replace rollers or tighten your opener's chain. Sometimes adding insulation panels or acoustic door seals helps dampen vibration transmitting into living spaces. Call us for a noise diagnostic.
My garage door came off the track—is this something I can fix myself?
Don't try to force it back yourself; you could damage the door or get hurt. Off-track doors usually mean bent tracks, broken rollers, or damaged hinges. Our team will safely assess what knocked it out of alignment—sometimes it's just a minor adjustment, other times brackets or rollers need replacing. Once we get it back on track, we'll check the whole system to prevent it happening again. This isn't a DIY situation.
How often should I replace the weather stripping around my garage door?
Maple Valley winters and rainy seasons are tough on seals. We typically recommend replacing weather stripping every 3–5 years, depending on your door's age and exposure. If you notice drafts, water pooling inside after rain, or visible cracks in the rubber, it's time. Good seals keep your garage warmer, reduce utility costs, and protect stored items from moisture. We can replace bottom seals, side strips, and top weatherstripping as part of routine maintenance or during a full service.
The safety sensors by my garage door aren't working—why won't the door close?
Those infrared sensors are critical safety features, and misalignment or blockage is the most common issue. Dust, spider webs, or a slight bump can throw them off. First, clean the lens on both sensors with a soft cloth. If that doesn't work, they may need realignment—the sensor eyes must face each other perfectly. If you're still getting a warning light or the door reverses, the sensors might be failing electrically. We can test, realign, or replace them quickly.
What maintenance should I do before winter hits?
Maple Valley's wet, cold winters put stress on garage doors. Before the season, lubricate all moving parts with silicone spray, check that weather stripping isn't cracked or missing, and test your safety sensors. Inspect the springs for rust or fraying—cold makes metal brittle and more prone to snapping. Make sure your opener batteries are fresh if you use a remote. Clear debris from the tracks so water doesn't freeze and bind the door. A quick fall tune-up prevents costly winter breakdowns.
Are you licensed, bonded, and insured?
Yes. Maple Valley Garage Doors is fully licensed and insured for residential garage door service and installation. We carry liability and worker's comp coverage so you're protected if anything goes wrong on your property. Our technicians are trained and certified to work safely with high-tension springs and electrical systems. You can trust that we meet all local codes and regulations. Ask us for proof of insurance when you call—we're happy to share those details.
How do I know if my springs are worn out or if it's something else?
Broken springs usually announce themselves—you'll hear a loud snap or bang, and the door won't open or feels extremely heavy. If your door opens but feels sluggish, wobbles, or the opener is straining, a worn spring is likely. Sometimes what feels like a spring issue is actually a bent track, misaligned sensors, or a failing opener. That's why we always do a full inspection. Springs are under extreme tension and dangerous to replace yourself—let us handle it safely and accurately.
What's the difference between torsion and extension springs, and which do I have?
Torsion springs run horizontally above your door and twist to lift it—they're more durable, quieter, and safer. Extension springs run along the sides of the door and stretch to lift it—they're less expensive but wear faster and have more moving parts. Most modern homes use torsion springs. You can identify yours by looking at the door's mechanics, but don't touch the springs themselves; they're dangerous under tension. We can tell you which type you have and discuss replacement options during a service visit.
My garage door remote isn't working anymore—do I need to buy a new one?
Not necessarily. First, try replacing the batteries—dead batteries are the #1 reason remotes stop responding. If that doesn't work, the remote may need reprogramming to your opener; the pairing can reset from power outages or accidental button presses. Most newer openers have a simple reprogram button on the unit itself. If reprogramming doesn't work, the remote receiver or transmitter might be failing. We can test your remote and reprogram or replace it as needed, often for less than buying a new one.